Optional to the standard Laser Centering, the SMD Pick and Place FLX2010 system can be fitted with a COGNEX Vision System. With this optional system, the capability is increased to allow the placing of 50x50 mm components and 0.3 mm pitch. The Vision System is delivered as a standard on the FLX2010-V. It can be optionally retro-fitted onsite to a standard machine.

	100% check for bent or missing legs before component placing
	100% check for missing balls for BGA components
	Precise component alignment using legs as reference
	Multiple field of view inspection for components up to 50x50 mm
	Utilises local component reference marks
	Recognition of PCB reference marks to align the PCB
	Full pattern recognition. Also recognises difficult reference marks

The Vision system enhances the FLX2010 system to meet higher demands. Due to the possiblity of retrofitting, your machine investment is 100% protected. The construction of a vision system requires one feeder position. This brings the possible feeder capacity of a standalone machine to 180 (L-Model till 300), and an inline machine to a max 90 (L-Model till 140). For futher information of the basic FLX2010 see.